How Do I Install an Onboard Charger?

Follow the steps below to properly mount your onboard charger. 

Mounting Instructions

Step 1: Turn the ignition key to the OFF position.  

Step 2: Locate the TOW/RUN Toggle Switch on your golf cart and turn it to TOW mode (TOW/RUN switch is located under the seat in the battery compartment).  

Step 3: Choose a solid surface & correct hardware to ensure the charger is mounted properly. (Example Locations: baggage well, battery compartment, the bottom of the seat) Provide a minimum of 3 inches of space between the fan and any other object for the charger to properly cool itself. 

Step 4: Using your charger as a template, hold the charger against the mounting location & mark the holes. The mounting locations on the charger are shown below. 

Step 5: Set the charger aside. Predrill holes on marked locations  

Step 6: Line up the charger with the predrilled holes. Secure with bolts or screws. 

Step 7: Locate the battery with the main POSITIVE (+) terminal in the electrical series on your cart batteries. This can be identified by a POSITIVE (+) terminal that has a large gauge wire connecting the battery pack to the cart.  

Step 8: Attach the red lead of the charger (marked with red heat shrink) to the main battery Positive (+). Applying Dielectric grease around the connections will help prevent corrosion.

Step 9: Locate the battery with the main NEGATIVE (-) terminal in the electrical series on your cart batteries. This can be identified by a NEGATIVE (-) terminal that has a large gauge wire connecting the battery pack to the cart.  

Step 10: Attach the black lead (marked with black heat shrink) to the main battery NEGATIVE (-). Applying Dielectric grease around the connections will help prevent corrosion.

Step 11: Switch the golf cart to RUN Mode